Christopher Knight Home Peter | Outdoor Acacia Wood Dining Chair Set of 2, Teak/Cream Cushion
$37.99
Related Products
If you are on the hunt for more dining chars for your patio set, than look no further than these wooden armed chairs. With a sturdy frame and clean wood line, these dining chairs are a must have. The water resistant fabric of the cushions will stand up to the little messes of life, allowing you to use these chairs to the fullest extent.
- Material: Acacia Wood
- Cushion Material: Water Resistant Fabric
- Multiple Color Options
- Assembly Required
- All Dimensions Exclude Cushion Measurements
- Dimensions: 23.50 inches deep x 21.25 inches wide x 35.50 inches high
- Seat Dimensions: 18.00 inches deep x 18.00 inches wide x 17.75 inches high
- Arm Height: 25.50 inches
- Seat Cushion Thickness: 2.50 inches
- Weight Capacity: 400 lbs
If you are on the hunt for more Dining chars for your patio set, than look no further than these wooden armed chairs, with a sturdy frame and clean wood line, These dining chairs are a must have, the water resistant fabric of the cushions will stand up to the little messes of life, allowing you to use these chairs to the fullest extent
Includes: two (2) dining chairs
Material: Acacia wood | cushion material: Water resistant fabric | Composition: 100% polyester | finish: teak | cushion color: cream
Dimensions: 23.50 inches deep x 21.25 inches wide x 35.50 inches high; Seat Dimensions: 18.00 inches deep x 18.00 inches wide x 17.75 inches high
Assembly required
8 reviews for Christopher Knight Home Peter | Outdoor Acacia Wood Dining Chair Set of 2, Teak/Cream Cushion
Add a review
$37.99
Kent Higgins –
Really well designed
Assembling furniture that’s shipped “KD” (knocked down) can be a challenge. Not here. Somebody put a lot of thought into planning the furniture, how it goes together, and how to package it. Well done!Be aware this will arrive in a HEAVY carton. It’s marked for two-person lift, and that’s probably right. The carton is roughly two feet by four feet. Carefully cut the outside packing tape, but DO NOT CUT the bow itself. Lay it flat on the floor or a table and flip the top open. You will see a piece of white Styrofoam as the top padding. KEEP IT as the base on which to assemble your chairs (as suggested in the very clear instructions. I include it here in case you don’t believe in reading instructions beforehand!)No searching for the assembly hardware – it’s right there in two plastic bags hooked to a red label. Each bag contains an Allen wrench and seven long wood screws. You need only six per chair. They sent extras – which I wish all their kith and kin did.The chair goes together quickly. The mortise and tenon connections are cut in such a way that they will fit together only the right way. The wood finish is smooth, but not highly polished. This is outdoor furniture (I’m using it indoors, and it’s fine, but it’s clearly not Chippendale, but it does have elements of that style.The only time I ran into difficulty was with the seat cushion, which itself was just fine. It is provided with four Velcro straps that are supposed to slip through the seat slats and connect below the seat. Some do, but some have been assembled in such a way that they are thicker than they should be. You can push the properly-done ones right through, but some will prove difficult. Fortunately I had a hemostat handy and could clamp onto a corner and pull them through. After that, smooth sailing.I’m impressed by these chairs but don’t know how reliable they will be. I think just fine.
Suzanne –
We love these chairs!
We are using these chairs on our covered patio and we LOVE THEM. They are very sturdy and the seat is deep enough for my 6’2” tall husband to sit comfortably. In fact, we like them so much that we are going to buy a couple more sets for our other outdoor areas.Assembly was easy enough. I did it myself. Initially, one of the chairs seemed a little wobbly, but that’s only because I didn’t follow the directions. When you first put the screws into place, you’re not supposed to tighten them all the way down. You leave them just a little bit loose and sit in the chair so it can “adjust.” Then you tighten them down. Just pointing this out for anyone who may have a similar issue.
christopher stewart –
Great for children or little people
This dining chair is made for people who’re under 5’8” at most. It’s also not very wide. It’s size is reminiscent of an economy class chair on an airplane. The pad doesn’t really provide cushion and the arms are very low preventing a tall person from resting their arms on them. The seat back hits about 1/3 to 1/2 up your back causing an unpleasant feeling.The construction of the chair is good and the assembly was easy. I would recommend this for children or very small adults.
Sand/Sun/Snow –
Seat Cushions THIN, beautiful Acacia and design.
These are lovely chairs, they go well with our teak table.They are sturdy and easy to assemble.I highly recommend finding different cushions – these are so thin that sitting too long is uncomfortable.I am trying to find someone who can make new cushions that won’t be too expensive.If you don’t want that expense, consider a different chair.
George Johnson –
Quality
Great style. Great price
ajn –
Chairs
They look great with the table. They were easy to put together and solid.Not sure I would get the cream cushions again as they were a little lighter than I would have liked but they look great. I think the material is stain resistant so all is good.
Jake O. –
Great quality.
Great quality.
Garden Lover –
Defective
First chair went together perfectly, second one had holes misdrilled holes so impossible to put together. Was directed to return product which was a hassle to have to disassemble good chair to return both. Frustrating to say the least.